INKRAYON Troubleshooting Guide

Gaps in Top Layers

Gaps in Top Layers

Erik Haupt
Holes or gaps in the top layers of the print.
Over-Extrusion

Over-Extrusion

Erik Haupt
Printer extrudes too much plastic, prints looks very messy.
Under-Extrusion

Under-Extrusion

Erik Haupt

Printer does not extrude enough plastic, gaps between perimeters and infill.

Not Sticking to the Bed

Not Sticking to the Bed

Erik Haupt
The first layer does not stick to the bed and the print quickly fails.
Problem: Extrusion startet nicht

Problem: Extrusion startet nicht

Erik Haupt

Printer does not extrude plastic at the beginning of the print.

Beliebte Beiträge

  1. Gaps in Top Layers
    Gaps in Top Layers
    Jun 04, 2020
  2. Over-Extrusion
    Over-Extrusion
    Jun 04, 2020
  3. Problem: Extrusion startet nicht
    Problem: Extrusion startet nicht
    Jun 04, 2020
  4. Not Sticking to the Bed
    Not Sticking to the Bed
    Jun 04, 2020
  5. Under-Extrusion
    Under-Extrusion
    Jun 04, 2020

Ausgewählte Produkte

Save 27%
INKRAYON® | Glass (PEN-PET) Clear Blue - 3D Druck FilamentINKRAYON® | Glass (PEN-PET) Clear Blue - 3D Druck Filament
INKRAYON® INKRAYON® | Glass (PEN-PET) Clear Blue
26,90 € 36,90 €
2,69 € / 100g
Save 29%
INKRAYON® | Performance PLA - Blue - 3D Druck FilamentINKRAYON® | Performance PLA - Blue - 3D Druck Filament
INKRAYON® INKRAYON® | Performance PLA - Blue
24,90 € 34,90 €
2,49 € / 100g